Iimbonakalo:
- Broadband
- Ubungakanani obuncinci
- Ilahleko yokuFaka ephantsi
Isahluli samandla eRF sisixhobo esisetyenziswa kakhulu kwiinkqubo zonxibelelwano ezingenazingcingo. Umsebenzi wayo ophambili kukwahlula isignali yegalelo kwiimpawu ezininzi zemveliso ngelixa ugcina iimpawu zesignali yentsusa, okanye ukudibanisa imiqondiso emininzi yokufaka kwimveliso enye. Kuhlobo lwesahluli samandla angenakwenziwa, umthetho-siseko woyilo we-8-way power divider/combiner kukwakha uthungelwano lwesebe usebenzisa imigca yesebe ye-microstrip, kwaye isebenzise imigca ye-quarter wavelength microstrip transmission lines ukwenzela ukuthelekiseka kwe-impedance, ukwenzela ukuba uthintelo lwezibuko ngalinye ilingana no 50 ohms. Ngelixa i-branching, ukuphumelela okuphezulu kokuhanjiswa kwamandla kufezekiswa.
1. Xa usebenzisa i-8-way power divider/combiner njengesahluli samandla, kukho i-port ye-1 yokufaka kunye ne-8 ye-output port; Xa isetyenziswe njengomhlanganisi, kukho i-8 yokufaka i-port kunye ne-1 port output.
2. Ukuba neempawu zombane ezifana nokusebenza okubanzi, ilahleko ephantsi yokufaka, inzuzo ephezulu kunye nokuzihlukanisa.
3. Itekhnoloji evuthiweyo kunye nokusebenza okuzinzile. Ukuze kuncitshiswe ukusebenza kakuhle kothumelo okubangelwa kukubonakalisa umqondiso, siye saqhuba uyilo lokumatanisa i-impedance kwaye salungisa umlinganiselo wamaza ezibuko; Ukunciphisa ukubonakalisa umqondiso obangelwa yimiphumo yokuguquka, ukuguquka ukusuka kwi-coaxial connectors ukuya kwimigca ye-microstrip; Ukwandisa i-bandwidth kunye nokugcina umlinganiselo ophantsi wamaza, ukuphucula i-impedance ehambelana noyilo lwesebe; Ukuze ugweme i-resonance ngaphakathi kwinqanaba le-frequency yokusebenza, lungisa isakhiwo secavity.
Iindlela ezi-8 zokwahlula amandla/izihlanganisi zinezicelo ezininzi kumhlaba weRF, zibonelela ngemiqondiso yovavanyo, ukudibanisa ifidi ukuya nokusuka kwii-eriyali, imiqondiso yokwahlula esele idlulisiwe kwaye ifunyenwe kwiintambo zomnxeba, kunye nezinye iinjongo ezahlukeneyo.
I-Qualwave Inc. ukubonelela nge-8-way-power splitters / i-combiners kunye ne-frequency range ye-DC ~ 67GHz, amandla afikelela kwi-600W, ilahleko enkulu yokufaka i-23dB, kunye nobuncinci bokuhlukaniswa kwe-6dB. Sinikezela ngeendlela ezahlukeneyo zokudibanisa ezifana ne-SMA, N, TNC, N & SMA, 2.4mm, 2.92mm, njl. Iimveliso zethu zisetyenziswe ngokubanzi kwaye zidunyiswe kwiinkalo ezininzi.
Inombolo yendawo | RF Frequency(GHz, Min.) | RF Frequency(GHz, Max.) | Amandla njengoMahluli(W) | Amandla njengoMdibanisi(W) | Ilahleko yokuFaka(dB, Max.) | Ukubekwa wedwa(dB, Min.) | I-Amplitude Balance(±dB,Ubuninzi.) | ISigaba Sokulingana(±°,Ubukhulu) | VSWR(Ubukhulu.) | Izihlanganisi | Ixesha lokukhokhela(Iiveki) |
---|---|---|---|---|---|---|---|---|---|---|---|
QPD8-0-2000-2 | DC | 2 | 2 | - | 19 | 17.5 | ±0.5 | ±1 | 1.25 | N, TNC | 2~3 |
QPD8-0-2000-2-S | DC | 2 | 2 | - | 19 | 17.5 | 0.3 | ±3 | 1.15 | I-SMA | 2~3 |
QPD8-0-3000-2-S | DC | 3 | 2 | - | 18±1.5 | 18 | ±1.0 | - | 1.3 | I-SMA | 2~3 |
QPD8-0-3000-2-N | DC | 3 | 2 | - | 19.5 | 18.5 | ±0.5 | ±2 | 1.3 | N | 2~3 |
QPD8-0-4000-2-S | DC | 4 | 2 | - | 19.5 | 17 | 0.8 | ±8 | 1.4 | I-SMA | 2~3 |
QPD8-0-6000-2-S | DC | 6 | 2 | - | 18±2.5 | 18 | ±1.2 | - | 1.5 | I-SMA | 2~3 |
QPD8-0-8000-2 | DC | 8 | 2 | - | ±2(uhlobo.) | 16 | ±5 | ±90 | 1.9 | SMA, N | 2~3 |
QPD8-0-10000-R5-S | DC | 10 | 0.5 | - | 18±2.8 | - | ±2 | - | 1.6 | I-SMA | 2~3 |
QPD8-0-18000-1-S | DC | 18 | 1 | - | 23 | 10 | ±1.2 | - | 2.5 | I-SMA | 2~3 |
QPD8-0-26500-2-S | DC | 26.5 | 2 | - | 3 | 18 | 2 | 2 | 1.6 | I-SMA | 2~3 |
QPD8-0-40000-2-K | DC | 40 | 2 | - | 4 | 18 | 2 | 2 | 1.6 | 2.92mm | 2~3 |
QPD8-2-250-1-S | 0.002 | 0.25 | 1 | - | 1 | 25 | ±0.2 | ±2 | 1.3 | I-SMA | 2~3 |
QPD8-5-500-10-N | 0.005 | 0.5 | 10 | - | 1.5 | 20 | 0.3 | ±5 | 1.25 | N | 2~3 |
QPD8-5-1000-1-S | 0.005 | 1 | 1 | 0.25 | 3 | 18 | 0.5 | ±5 | 1.3 | I-SMA | 2~3 |
QPD8-5-1000-50-S | 0.005 | 1 | 50 | 50 | 1.6 | 12 | ±0.2 | ±5 | 1.5 | I-SMA | 2~3 |
QPD8-5-2000-1-S | 0.005 | 2 | 1 | 1 | 5 | 15 | ±0.5 | ±5 | 1.8 | I-SMA | 2~3 |
QPD8-10-100-1-S | 0.01 | 0.1 | 1 | 0.5 | 1 | 20 | 0.4 | ±4 | 1.3 | I-SMA | 2~3 |
QPD8-20-100-K15-S | 0.02 | 0.1 | 150 | 150 | 1.3 | 20 | 0.2 | ±5 | 1.5 | I-SMA | 2~3 |
QPD8-20-520-K2-S | 0.02 | 0.52 | 200 | 200 | 1 | 12 | 0.5 | 5 | 1.6 | I-SMA | 2~3 |
QPD8-30-500-K1-N | 0.03 | 0.5 | 100 | 100 | 0.75 | 20 | 0.3 | ±5 | 1.4 | N | 2~3 |
QPD8-30-3000-2-S | 0.03 | 3 | 2 | - | 18.5 | 17 | 0.5 | ±5 | 1.3 | I-SMA | 2~3 |
QPD8-70-500-K15-S | 0.07 | 0.5 | 150 | 150 | 1 | 12 | 0.2 | 3 | 1.5 | I-SMA | 2~3 |
QPD8-70-1010-K6-NS | 0.07 | 1.01 | 600 | 600 | 1.8 | 8 | 0.3 | 5 | 1.5 | I-SMA&N | 2~3 |
QPD8-80-500-30-S | 0.08 | 0.5 | 30 | 2 | 1.8 | 18 | ±0.2 | ±3 | 1.3 | I-SMA | 2~3 |
QPD8-80-1000-K2-S | 0.08 | 1 | 200 | 200 | 1.3 | 15 | ±0.2 | ±5 | 1.35 | I-SMA | 2~3 |
QPD8-80-4000-30-S | 0.08 | 4 | 30 | 2 | 6.6 | 13 | 0.4 | ±8 | 1.55 | I-SMA | 2~3 |
QPD8-98-102-30-N | 0.098 | 0.102 | 30 | 2 | 0.8 | 20 | 0.2 | ±3 | 1.2 | N | 2~3 |
QPD8-100-700-1-S | 0.1 | 0.7 | 1 | 0.5 | 2 | 18 | 0.4 | ±8 | 1.5 | I-SMA | 2~3 |
QPD8-100-700-30-S | 0.1 | 0.7 | 30 | 2 | 2 | 20 | 0.3 | ±3 | 1.25 | I-SMA | 2~3 |
QPD8-100-2000-30-S | 0.1 | 2 | 30 | 2 | 3.4 | 18 | 0.3 | ±4 | 1.35 | I-SMA | 2~3 |
QPD8-100-3000-30-S | 0.1 | 3 | 30 | 2 | 6.5 | 18 | 0.3 | ±6 | 1.35 | I-SMA | 2~3 |
QPD8-100-4000-30-SMS | 0.1 | 4 | 30 | 2 | 6.5 | 12 | 0.5 | ±6 | 1.55 | I-SMA | 2~3 |
QPD8-108-138-50-N | 0.108 | 0.138 | 50 | 50 | 0.8 | 15 | 0.2 | ±4 | 1.25 | I-SMA | 2~3 |
QPD8-200-1000-30-S | 0.2 | 1 | 30 | 2 | 1.4 | 20 | 0.4 | ±4 | 1.25 | I-SMA | 2~3 |
QPD8-200-1000-K1-S | 0.2 | 1 | 100 | 10 | 1 | 20 | ±0.3 | ±4 | 1.25 | I-SMA | 2~3 |
QPD8-200-2000-30-S | 0.2 | 2 | 30 | 2 | 2.8 | 18 | 0.3 | ±4 | 1.3 | I-SMA | 2~3 |
QPD8-200-2300-30-S | 0.2 | 2.3 | 30 | 2 | 3 | 18 | 0.3 | ±4 | 1.3 | I-SMA | 2~3 |
QPD8-200-6000-30-S | 0.2 | 6 | 30 | 2 | 6.8 | 17 | 0.5 | ±5 | 1.35 | I-SMA | 2~3 |
QPD8-223-235-30-S | 0.223 | 0.235 | 30 | 2 | 1.2 | 20 | 0.4 | ±4 | 1.3 | I-SMA | 2~3 |
QPD8-240-30-S | 0.24 | 30 | 2 | 0.6 | 20 | ±0.2 | ±2 | 1.2 | I-SMA | 2~3 | |
QPD8-300-500-30-S | 0.3 | 0.5 | 30 | 2 | 0.8 | 20 | 0.2 | ±3 | 1.25 | I-SMA | 2~3 |
QPD8-300-3000-30-NS | 0.3 | 3 | 30 | 2 | 2.6 | 20 | 0.3 | ±4 | 1.3 | I-SMA&N | 2~3 |
QPD8-300-6000-30-S | 0.3 | 6 | 30 | 2 | 4.8 | 20 | 0.3 | ±6 | 1.4 | I-SMA | 2~3 |
QPD8-300-18000-20-S | 0.3 | 18 | 20 | 1 | 5 | 7 | ±0.5 | ±8 | 2.3 | I-SMA | 2~3 |
QPD8-400-900-30-B | 0.4 | 0.9 | 30 | 2 | 0.6 | 20 | 0.3 | ±3 | 1.25 | I-BNC | 2~3 |
QPD8-400-4000-30-N | 0.4 | 4 | 30 | 2 | 2.4 | 20 | 0.4 | ±4 | 1.35 | N | 2~3 |
QPD8-400-6000-30-S | 0.4 | 6 | 30 | 2 | 3.6 | 20 | 0.4 | ±5 | 1.35 | I-SMA | 2~3 |
QPD8-450-6000-30-S | 0.45 | 6 | 30 | 2 | 3.2 | 18 | 0.3 | ±4 | 1.35 | I-SMA | 2~3 |
QPD8-470-510-10-S | 0.47 | 0.51 | 10 | - | 2 | 20 | ±0.5 | ±5 | 1.3 | I-SMA | 2~3 |
QPD8-470-510-20-S | 0.47 | 0.51 | 20 | - | 1.5 | 20 | ±0.5 | ±5 | 1.3 | I-SMA | 2~3 |
QPD8-500-2000-30-S | 0.5 | 2 | 30 | 2 | 1.5 | 20 | 0.4 | ±4 | 1.3 | I-SMA | 2~3 |
QPD8-500-3000-30 | 0.5 | 3 | 30 | 2 | 1.8 | 20 | ±0.3 | ±4 | 1.3 | SMA, N | 2~3 |
QPD8-500-4000-30-NS | 0.5 | 4 | 30 | 2 | 2 | 20 | 0.3 | ±4 | 1.3 | I-SMA&N | 2~3 |
QPD8-500-4000-30-S | 0.5 | 4 | 30 | 2 | 2.3 | 20 | 0.2 | ±4 | 1.3 | I-SMA | 2~3 |
QPD8-500-6000-30 | 0.5 | 6 | 30 | 2 | 3 | 20 | ±0.2 | ±6 | 1.4 | SMA, N | 2~3 |
QPD8-500-8000-20 | 0.5 | 8 | 20 | 1 | 4 | 18 | 0.4 | ±5 | 1.5 | SMA, N | 2~3 |
QPD8-500-18000-20-S | 0.5 | 18 | 20 | 1 | 6 | 14 | 0.8 | ±10 | 2 | I-SMA | 2~3 |
QPD8-500-26500-30-S | 0.5 | 26.5 | 30 | 2 | 8 | 18 | ±0.5 | ±10 | 1.6 | I-SMA | 2~3 |
QPD8-500-40000-20-K | 0.5 | 40 | 20 | 2 | 11 | 15 | ±0.8 | ±12 | 1.8 | 2.92mm | 2~3 |
QPD8-600-2000-30-S | 0.6 | 2 | 30 | 2 | 1 | 20 | 0.3 | ±4 | 1.25 | I-SMA | 2~3 |
QPD8-600-6000-30 | 0.6 | 6 | 30 | 2 | 2.8 | 18 | 0.4 | ±5 | 1.4 | SMA, N | 2~3 |
QPD8-600-8000-30-S | 0.6 | 8 | 30 | 2 | 3.6 | 20 | 0.4 | ±5 | 1.4 | I-SMA | 2~3 |
QPD8-700-3000-30 | 0.7 | 3 | 30 | 2 | 1.2 | 20 | ±0.2 | ±2 | 1.3 | SMA, N | 2~3 |
QPD8-700-4000-30-N | 0.7 | 4 | 30 | 2 | 1.8 | 20 | ±0.4 | ±4 | 1.3 | N | 2~3 |
QPD8-750-1710-30-S | 0.75 | 1.71 | 30 | 2 | 0.6 | 20 | 0.3 | ±3 | 1.2 | I-SMA | 2~3 |
QPD8-800-2000-30-S | 0.8 | 2 | 30 | 2 | 1 | 20 | 0.3 | ±4 | 1.25 | I-SMA | 2~3 |
QPD8-800-2500-30-N | 0.8 | 2.5 | 30 | 2 | 1.4 | 20 | 0.4 | ±4 | 1.25 | N | 2~3 |
QPD8-800-2700-30-N | 0.8 | 2.7 | 30 | 2 | 1.5 | 20 | 0.4 | ±4 | 1.3 | N | 2~3 |
QPD8-800-4200-30-S | 0.8 | 4.2 | 30 | 2 | 1.8 | 20 | 0.4 | ±4 | 1.4 | I-SMA | 2~3 |
QPD8-800-4200-K2-NS | 0.8 | 4.2 | 200 | - | 1.2 | 6 | 0.25 | ±7 | 1.3 | I-SMA&N | 2~3 |
QPD8-800-5000-20-S | 0.8 | 5 | 20 | 1 | 1.5 | 20 | ±0.4 | ±3 | 1.4 | I-SMA | 2~3 |
QPD8-800-6000-20-S | 0.8 | 6 | 20 | 2 | 2 | 20 | 0.4 | ±5 | 1.35 | I-SMA | 2~3 |
QPD8-800-8000-30-S | 0.8 | 8 | 30 | 2 | 3.6 | 20 | 0.4 | ±5 | 1.4 | I-SMA | 2~3 |
QPD8-870-1005-K3-N | 0.87 | 1.005 | 300 | 300 | 0.6 | 18 | 0.2 | 3 | 1.3 | N | 2~3 |
QPD8-950-2150-30 | 0.95 | 2.15 | 30 | 2 | 3 | 20 | 0.4 | ±4 | 1.25 | I-SMA, N, TNC, N&SMA | 2~3 |
QPD8-950-2150-30-S-DC | 0.95 | 2.15 | 30 | 1 | 0.6 | 20 | 0.3 | ±3 | 1.25 | I-SMA | 2~3 |
QPD8-1000-1700-30-S | 1 | 1.7 | 30 | 2 | 0.8 | 22 | ±0.4 | ±4 | 1.25 | I-SMA | 2~3 |
QPD8-1000-2000-K2-NS | 1 | 2 | 200 | 200 | 0.5 | 12 | 0.5 | 5 | 1.5 | I-SMA&N | 2~3 |
QPD8-1000-2500-K2-S | 1 | 2.5 | 200 | 200 | 0.9 | 16 | 0.3 | 5 | 1.5 | I-SMA | 2~3 |
QPD8-1000-2500-K2-NS | 1 | 2.5 | 200 | - | 0.5 | 8 | ±0.3 | ±4 | 1.4 | I-SMA&N | 2~3 |
QPD8-1000-2500-K3-NS | 1 | 2.5 | 300 | 300 | 0.7 | - | 0.5 | 8 | 1.5 | I-SMA&N | 2~3 |
QPD8-1000-3000-30-S | 1 | 3 | 30 | 2 | 1 | 18 | 0.3 | ±4 | 1.3 | I-SMA | 2~3 |
QPD8-1000-6000-30 | 1 | 6 | 30 | 2 | 2.1 | 20 | 0.2 | ±4 | 1.25 | SMA, SMP | 2~3 |
QPD8-1000-8000-K1-S | 1 | 8 | 100 | 100 | 1.8 | 20 | 0.4 | 3 | 1.5 | I-SMA | 2~3 |
QPD8-1000-18000-20-S | 1 | 18 | 20 | 1 | 4 | 15 | ±0.5 | ±10 | 1.8 | I-SMA | 2~3 |
QPD8-1000-26500-30-S | 1 | 26.5 | 30 | 2 | 5.4 | 18 | ±0.5 | ±7 | 1.6 | I-SMA | 2~3 |
QPD8-1000-40000-20-K | 1 | 40 | 20 | 2 | 7.3 | 18 | ±0.7 | ±11 | 1.7 | 2.92mm | 2~3 |
QPD8-1000-50000-20-2 | 1 | 50 | 20 | 2 | 9.2 | 18 | ±0.9 | ±14 | 1.8 | 2.4mm | 2~3 |
QPD8-1100-1700-30-T | 1.1 | 1.7 | 30 | 2 | 0.8 | 22 | 0.3 | ±3 | 1.25 | I-TNC | 2~3 |
QPD8-1270-1460-K8-NS | 1.27 | 1.46 | 800 | 800 | 0.5 | 14 | 0.2 | 3 | 1.5 | I-SMA&N | 2~3 |
QPD8-1270-1460-1K12-EN | 1.27 | 1.46 | 1120 | 1120 | 0.5 | 14 | 0.2 | 3 | 1.5 | I-SC&N | 2~3 |
QPD8-1370-30-S | 1.37 | 30 | 2 | 0.8 | 20 | 0.2 | ±3 | 1.2 | I-SMA | 2~3 | |
QPD8-1500-1700-20-S | 1.5 | 1.7 | 20 | 1 | 0.3 | 20 | ±0.2 | ±4 | 1.25 | I-SMA | 2~3 |
QPD8-1500-5000-30-S | 1.5 | 5 | 30 | 2 | 1.2 | 20 | ±0.2 | ±2 | 1.3 | I-SMA | 2~3 |
QPD8-1525-1850-K1-N | 1.525 | 1.85 | 100 | 10 | 0.8 | 18 | 0.3 | ±4 | 1.2 | N | 2~3 |
QPD8-1805-1880-K2-S | 1.805 | 1.88 | 200 | 200 | 0.9 | 18 | 0.2 | 4 | 1.4 | I-SMA | 2~3 |
QPD8-1850-2700-K25-N | 1.85 | 2.7 | 250 | 15 | 0.8 | 18 | 0.4 | ±4 | 1.3 | N | 2~3 |
QPD8-2000-4000-K16-S | 2 | 4 | 160 | - | 0.9 | 18 | 0.3 | 5 | 1.5 | I-SMA | 2~3 |
QPD8-2000-6000-30 | 2 | 6 | 30 | 2 | 1.2 | 18 | 0.4 | ±4 | 1.3 | SMA, N | 2~3 |
QPD8-2000-6000-K65-7N | 2 | 6 | 650 | 650 | 0.8 | - | 0.4 | 10 | 1.6 | 7/16 DIN&N | 2~3 |
QPD8-2000-8000-30-S | 2 | 8 | 30 | 2 | 1.5 | 20 | 0.4 | ±3 | 1.35 | I-SMA | 2~3 |
QPD8-2000-10000-30-S | 2 | 10 | 30 | 2 | 2 | 18 | ±0.4 | ±4 | 1.4 | I-SMA | 2~3 |
QPD8-2000-18000-20-S | 2 | 18 | 20 | 1 | 3.2 | 16 | 0.5 | ±10 | 1.6 | I-SMA | 2~3 |
QPD8-2000-26500-20 | 2 | 26.5 | 20 | 1 | 3.2 | 16 | ±0.8 | ±10 | 1.9 | SMA, 2.92mm | 2~3 |
QPD8-2000-40000-20-K | 2 | 40 | 20 | 2 | 5.9 | 18 | ±0.7 | ±10 | 1.7 | 2.92mm | 2~3 |
QPD8-2000-50000-20-2 | 2 | 50 | 20 | 1 | 7.2 | 18 | ±0.8 | ±12 | 1.8 | 2.4mm | 2~3 |
QPD8-2400-6000-30-S | 2.4 | 6 | 30 | 2 | 1.5 | 20 | 0.4 | ±4 | 1.35 | I-SMA | 2~3 |
QPD8-2700-3100-K2-S | 2.7 | 3.1 | 200 | - | 0.9 | 18 | 0.3 | ±5 | 1.5 | I-SMA | 2~3 |
QPD8-3000-13000-20-S | 3 | 13 | 20 | 1 | 2 | 18 | ±0.4 | ±6 | 1.4 | I-SMA | 2~3 |
QPD8-4000-6000-30-S | 4 | 6 | 30 | 2 | 1.2 | 18 | ±0.4 | ±4 | 1.4 | I-SMA | 2~3 |
QPD8-4000-8000-30-S | 4 | 8 | 30 | 2 | 0.8 | 18 | ±0.3 | ±5 | 1.35 | I-SMA | 2~3 |
QPD8-4000-12000-20-S | 4 | 12 | 20 | 1 | 1.5 | 18 | 0.2 | ±4 | 1.5 | I-SMA | 2~3 |
QPD8-4000-18000-30-S | 4 | 18 | 30 | 1 | 1.8 | 16 | ±0.5 | ±6 | 1.8 | I-SMA | 2~3 |
QPD8-4900-5900-30-S | 4.9 | 5.9 | 30 | 2 | 0.8 | 20 | 0.3 | ±3 | 1.3 | I-SMA | 2~3 |
QPD8-5000-12000-20-S | 5 | 12 | 20 | 1 | 1.2 | 18 | 0.5 | ±5 | 1.4 | I-SMA | 2~3 |
QPD8-5800-6500-K1-S | 5.8 | 6.5 | 100 | 100 | 0.9 | 18 | 0.3 | 5 | 1.5 | I-SMA | 2~3 |
QPD8-6000-6500-K15-S | 6 | 6.5 | 150 | 150 | 1 | 17 | 0.5 | 5 | 1.5 | I-SMA | 2~3 |
QPD8-6000-10000-K15-NS | 6 | 10 | 150 | 150 | 1 | - | 0.5 | 10 | 1.8 | I-SMA&N | 2~3 |
QPD8-6000-12000-20-SM | 6 | 12 | 20 | 1 | 1.5 | 18 | 0.4 | ±5 | 1.5 | I-SMA | 2~3 |
QPD8-6000-18000-50-S | 6 | 18 | 50 | - | 2.4 | 17 | ±0.5 | ±8 | 1.8 | I-SMA | 2~3 |
QPD8-6000-18000-50-SMS | 6 | 18 | 50 | - | 2.4 | 17 | ±0.5 | ±8 | 1.8 | I-SMA | 2~3 |
QPD8-6000-18000-K1-S | 6 | 18 | 100 | - | 2.4 | 15 | ±0.5 | ±8 | 1.8 | I-SMA | 2~3 |
QPD8-6000-18000-K3-S | 6 | 18 | 300 | 300 | 1.8 | 17 | 0.5 | 5 | 1.75 | I-SMA | 2~3 |
QPD8-6000-26500-30-S | 6 | 26.5 | 30 | 2 | 2.9 | 18 | ±0.5 | ±6 | 1.6 | I-SMA | 2~3 |
QPD8-6000-40000-20-K | 6 | 40 | 20 | 1 | 3.2 | 15 | ±0.5 | ±8 | 2.2 | 2.92mm | 2~3 |
QPD8-7130-7245-K1-S | 7.13 | 7.245 | 100 | 100 | 0.9 | 18 | 0.3 | 5 | 1.5 | I-SMA | 2~3 |
QPD8-8000-9000-K1-S | 8 | 9 | 100 | - | 1.5 | 18 | ±0.5 | ±5 | 1.35 | I-SMA | 2~3 |
QPD8-8000-12000-20-S | 8 | 12 | 20 | 1 | 1.4 | 18 | 0.4 | ±5 | 1.4 | I-SMA | 2~3 |
QPD8-9000-11000-20-S | 9 | 11 | 20 | 1 | 1.2 | 18 | 0.4 | ±5 | 1.4 | I-SMA | 2~3 |
QPD8-9000-45000-R1-2 | 9 | 45 | 0.1 | - | 7 | 15 | ±1 | ±20 | 1.4 | 2.4mm | 2~3 |
QPD8-17000-31000-20-K | 17 | 31 | 20 | 1 | 2 | 16 | ±0.5 | ±6 | 1.6 | 2.92mm | 2~3 |
QPD8-18000-26500-20-K | 18 | 26.5 | 20 | 1 | 1.8 | 16 | ±0.5 | ±6 | 1.6 | 2.92mm | 2~3 |
QPD8-18000-40000-20-K | 18 | 40 | 20 | 1 | 3.2 | 16 | ±0.5 | ±8 | 1.7 | 2.92mm | 2~3 |
QPD8-18000-40000-30-K | 18 | 40 | 30 | 1 | 3.6 | 15 | ±0.6 | ±6 | 1.7 | 2.92mm | 2~3 |
QPD8-18000-50000-20-2 | 18 | 50 | 20 | 1 | 4.2 | 18 | ±0.8 | ±10 | 1.8 | 2.4mm | 2~3 |
QPD8-18000-50000-20-2-1 | 18 | 50 | 20 | - | 2.5 | 20 | 0.5 | 8 | 1.6 | 2.4mm | 2~3 |
QPD8-24000-44000-20-2 | 24 | 44 | 20 | 1 | 3.6 | 18 | ±0.6 | ±8 | 1.7 | 2.4mm | 2~3 |
QPD8-26500-40000-20-K | 26.5 | 40 | 20 | 2 | 3 | 18 | ±0.5 | ±8 | 1.6 | 2.92mm | 2~3 |
QPD8-26500-50000-20-2 | 26.5 | 50 | 20 | 1 | 4.2 | 18 | ±0.8 | ±10 | 1.8 | 2.4mm | 2~3 |
QPD8-27000-32000-20-K | 27 | 32 | 20 | 1 | 1.8 | 18 | ±0.5 | ±8 | 1.5 | 2.92mm | 2~3 |
QPD8-35350-36150-20-K | 35.35 | 36.15 | 20 | 1 | 1.8 | 18 | ±0.5 | ±8 | 1.5 | 2.92mm | 2~3 |
QPD8-37450-39350-10-K | 37.45-39.35 | 10 | 1 | 2.4 | 15 | ±0.6 | ±6 | 1.6 | 2.92mm | 2~3 | |
QPD8-40000-67000-12-V | 40 | 67 | 12 | 1 | 5.9 | 16 | ±1 | ±12 | 1.9 | 1.85mm | 2~3 |
QPD8-50000-66000-R1 | 50 | 66 | 0.1 | - | 6 | 15 | ±1 | ±20 | 1.4 | - | 2~3 |